How to Sysprep a Windows Vista, 7, or 8 Image More Than Three Times @ SYS PC 系實電腦 :: 隨意窩 Xuite日誌
  • 擁有多年系統整合經驗,服務過的客戶包含家庭、企業、公家機關,有任何電腦相關問題都可洽詢。

     0906-583923

    高先生 aarongaw@gmail.com

  • 購物中心
  • 消費電子-娛樂新機通通有
  • [此功能已終止服務]
  • 關鍵字
  • BloggerAds
  • BloggerAds
  • 什麼都不奇怪
  • 甚麼都買
    1. 沒有新回應!
  • 201804162300How to Sysprep a Windows Vista, 7, or 8 Image More Than Three Times

    https://www.symantec.com/connect/articles/how-sysprep-windows-vista-7-or-8-image-more-three-times

    The easy way to get around the three time limit of sysprepping is to either a) use a virtual machine and save a snapshot before the first time you sysprep, or b) capture an image through the console of the state before sysprepping, and then deploy it when it to the same class machine when it needs updated.  If you accidentally reached the three rearm limit without having to start over from scratch, here is a step by step how to get around it.

    1) Open up Registry Editor. (Start > Run > regedit)

    2) Browse to HKEY_LOCAL_MACHINE\System\Setup\Status\Sysprep Status.

    3) Change the value of CleanupState to 2. (0x00000002)

    4) Change the value of GeneralizationState to 7. (0x00000007)

    5) Browse to HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\SoftwareProtectionPlatform.

    6) Change the value of SkipRearm to 1. (0x00000001)

    7) Open an administrative command prompt. (Start > Run > cmd... right click on the cmd icon and go to Run as Administrator)

    8) Type msdtc -uninstall and push enter.  Wait a minute and reboot.

    9) Type msdtc -install and push enter.  Wait a minute and reboot.

    10) Browse to c:\windows\system32\sysprep.  Delete the panther folder.

    11) Run sysprep.  It should now complete, and you can capture the image.

    This will have to be done every time you capture the image, but it still is less time consuming than starting over from scratch.

    沒有上一則|日誌首頁|沒有下一則
    回應